Subject: RE: Transmitter Production From: "Rob Wykes" Date: Mon, 9 May 2011 12:23:38 +0100 To: CC: "'Joost Heeroma'" Hi Sorry for the delay, I don't know exactly what temp the transmitters will be at under the rats skin but my guess would be above 30oC. My transmitters: T1: Implanted in animal 1 for a week no problem, re-implanted into animal 2, has been running for >3 weeks. Most of the time the signal is great, but there are a few times (hrs long) when the signal cuts out - flat EEG trace. Maybe it was a problem with my implantation or a problem with the transmitter? T2: Implanted in animal 1 for 1 week no problems, been implanted in animal 2 now for 2 weeks no problems and still going. T3: Implanted animal 1 for a week no problem, implanted in animal 2 for 6 weeks no problem, then signal went noisy. T4: Been implanted in animal 1 for >8 weeks no problem and still going. T5: Implanted in animal 1 for 5 weeks no problem T6: Implanted in animal 1 for 1 week no problem, implanted in animal 2 for 2 weeks no problem T7: Implanted animal 1 for 1 week no problem, implanted in animal 2 for 1 week no problem, implanted in animal 3 for 1 week no problem. T8: Implanted in animal 1 for about 6 weeks no problem and then started full range oscillations (sent you that ndf a few weeks ago). T9: Implanted animal 1 for 1 week no problem T10: Implanted animal 1 for 1 week no problem, implanted in animal 2 for >2 weeks no problem still going. T11: Implanted animal 1 for 4 weeks no problem, implanted in animal 2 for 2 weeks no problem, still going T12: Implanted animal 1 for 2 weeks no problem, implanted animal 2 for 1 week no problem T13: Implanted animal 1 for 2 weeks no problem T14: Implanted animal 1 for 3 weeks no problem and still going Cheers Rob